These are our most requested sidings. 105 Shiplap (Dutch Lap), Rough Lap Siding, Flitch/Wavey Board (Natural Edge) and others are available upon request.
Log Panel Siding
Our Log Siding is now available in 1 x 6 or 2 x 8. We can mill the 2 x 8 in Pine or Cypress. The 1 x 6 is available in pine, poplar, cedar or pine. Many of our customers choose the 1 x 6 for porches, soffits and interior rooms while the 2 x 8 is used on the exterior.
Our Bevel Siding differs from most because it is thicker. Many bevel sidings are thin and not as durable. We run ours 3/4" on thick edge and 3/8" on the thin edge and 8" wide. Both faces are rough sawn. It is usually installed with a 1" overlap.
Board & Batten
Our Board and Batten Siding is manufactured according to customer specifications. 10" or 12" boards with 3" or 4" bats are what we normally sell. 8" Boards with 2" bats is another option. Boards can be rough or milled, Air Dried or Kiln Dried and is typically produced from Pine or Cypress.
Howard Custom Lumber, LLC Craig & Angie Howard 1782 Boyd Willie Parnell Road Tibbie,AL 36583 251-847-2334 firstname.lastname@example.org